Canon 08011-41-UD2-003 Installation And Configuration Manual page 146

7. Press [NTP Server Check] to check the status of the NTP server.
If <OK> is displayed next to [NTP Server Check], time synchronization is
working correctly via SNTP.
If <Error> is displayed next to [NTP Server Check], check the settings for [NTP
Server Address] set in step 6.
8. Press [OK].
IMPORTANT
To perform time synchronization via SNTP, it is necessary to set the time zone
of the region in which you are using the machine in advance. For instructions on
how to set the time zone, see the Reference Guide that came with your machine.
9. Press [Done] repeatedly until the Basic Features screen is displayed.
146 Authorized Send Installation and Configuration Guide for imageRUNNER Machines