Simple Authentication Notification Messages - Canon 08011-41-UD2-003 Installation And Configuration Manual

6.2.4

Simple Authentication Notification Messages

This section explains the Simple authentication notification messages, along with
possible causes and remedies.
Message
Check Public DN and
Public Password and try
again
Anonymous binding not
accepted by host (host)
Confidentiality Required
Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Cause
The public DN and public
password have been configured
in the Configuration servlet,
however they are incorrect.
The server does not allow
anonymous binding, and the
public DN and public password
are not configured in the
Configuration servlet.
The authentication server you
are using has a "Require
TLS/SSL" option enabled, and
Authorized Send is not using
SSL for authentication.
Remedy
Verify the public DN and public
password.
• Verify that anonymous
connections are enabled on
the server.
• If anonymous connections
are required to be disabled,
configure the public DN and
public password credentials.
• Disable any "Require
TLS/SSL" options on the
authentication server.
• Enable SSL for
authentication in Authorized
Send. See "Creating an
Authentication Server,"
p. 49.
on
167