Ntlm Authentication Notification Messages - Canon 08011-41-UD2-003 Installation And Configuration Manual

Message
Unknown host (host)
An unknown Kerberos
error has occurred
6.2.3

NTLM Authentication Notification Messages

This section explains the NTLM authentication notification messages, along with
possible causes and remedies.
Message
NTLM requires
username, password and
domain
NTLM bind failed, no
connection to (host)
NTLM bind failed to host
(host) domain (domain)
An unknown NTLM error
has occurred
166 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Cause
The host cannot be resolved.
Any other Kerberos error message
that has not been defined as caught
has occurred.
Cause
The entered user name,
password, or domain is blank.
A NTLM bind is attempted, and
an LDAP connection has not
been established.
A NTLM bind is unsuccessful to
the specified host and host name.
Any other NTLM error message
that has not been defined as
caught has occurred.
Remedy
• Check your Kerberos
configuration.
• Ensure that the configured
server is active.
Check your Kerberos
configuration.
Remedy
Verify and reconfigure the
authentication server settings for
the appropriate authentication
server in the Configuration
servlet, and try to log on again.
Check your NTLM
configuration.
Check your NTLM
configuration.
Check your NTLM
configuration.