Canon 08011-41-UD2-003 Installation And Configuration Manual page 111

Resolution:
Brightness:
PDF Encryption:
Image Mode:
Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Select [200x200], [300x300], or [600x600] from the
drop-down list to correspond with the file type that
you selected from the Scan Settings for File Type
drop-down list. The default Resolution depends on
the file type that you selected.
NOTE
• If your machine does not support a particular
resolution, that resolution is not displayed.
• Authorized Send Version 4.0 and lower versions
have a 'DPI is user Configurable' setting on the
Options screen in the Configuration servlet. This
allows the System Administrator to enable or
disable the resolution on the SCAN SETTINGS
screen for the end user. However, this setting has
been removed from Authorized Send Version 4.1,
since the resolution enable or disable state is now
configured on the Scan Settings screen in the
Configuration servlet.
• If the [DPI is user Configurable] check box was not
selected and an upgrade to Authorized Send
Version 4.1 is performed, the resolution is disabled
for all file types.
Select [Auto], [10%], [20%], [30%], [40%], [50%],
[60%], [70%], [80%], [90%], or [100%] from the
drop-down list to correspond with the file type that
you selected from the Scan Settings for File Type
drop-down list. The default Brightness is 'Auto'.
The default setting is for the PDF Encryption icon to
appear on the SCAN SETTINGS screen. PDF
encryption is available only for PDF, PDF(Compct),
and PDF(OCR) file types.
Select [Text], [Text/Photo], or [Photo] from the
drop-down list to correspond with the file type that
you selected from the Scan Settings for File Type
drop-down list. The default Image Mode is 'Text'.
111