NordicTrack T 4.0 User Manual page 11

11. Have a second person hold the console assem-
bly near the Right Upright (89).
Connect the Upright Wire (88) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Remove the long tie from the
Upright Wire and the tie from the console wire.
Then, insert the connectors into the Right Upright
(89).
Set the console assembly on the Right Upright
(89) and the Left Upright (not shown). Make sure
that no wires are pinched.
12. Start an M8 x 25mm Patch Bolt (5) and two
5/16" x 5/8" Patch Bolts (113) with two M8 Star
Washers (10) into the Right Upright (89) and
Right Handrail (101) as shown. Do not tighten
the Patch Bolts yet.
Attach the Left Handrail (not shown) as de-
scribed above. Then, firmly tighten all six
Patch Bolts.
All manuals and user guides at all-guides.com
11
11
Console
Assembly
Console Wire
88
Long
Tie
89
12
101
5
89
Console
Wire
88
113
10