Move Highlight Bar, → ← = Change Setting, F1 = Help - AOpen DX6G Plus Manual

System Event Log
Critical Event Process
Stop POST After CPU or Memory Reduction .....[Disabled]
Halt System If No CPU or Memory Available ...[Enabled]
Threshold Setting
CPU Warning Temperature .....................[ xx] °C
CPU Fatal Temperature .......................[ xx] °C
System Temperature ..........................[ xx] °C
System Voltage ..............................[ xx] %
↑↓ = Move Highlight Bar,
Critical Event Process
STOP POST AFTER CPU OR MEMORY REDUCTION
BIOS checks the bad CPUs and memory modules during POST.
When this parameter is
whenever it finds a bad CPU or memory. Otherwise, if
system will continue running.
HALT SYSTEM IF NO CPU OR MEMORY AVAILABLE
When Enabled , the system will stop working when the memory
malfunctioned. Otherwise, if
running.
2-38
→ ← = Change Setting, F1 = Help
Enabled , BIOS will stop POST operation
the system will continue
Disabled
Page 2/2
the
Disabled
User's Guide