Operation Mode; Ecp Dma Channel; Onboard Device Settings - AOpen DX6G Plus Manual

Operation Mode

This item allows you to set the operation mode of the parallel port.
The table below lists the different operation modes.
Setting
Standard Parallel Port
(Standard)
Standard and Bidirectional
(Bidirectional)
Enhanced Parallel Port
(EPP)
Extended Capabilities Port
(ECP)
This item becomes active only if you select
as the operation mode. It allows you to assign DMA
Port (ECP)
channel 1 or DMA channel 3 for the ECP parallel port function (as
required in Windows 95).
2.5.3

Onboard Device Settings

The Onboard Device Settings menu allows you to configure the
onboard communication ports and the onboard devices. Selecting
this option from the Onboard Peripherals menu displays the following
screen:
2-18
Function
Allows normal speed one-way
operation
Allows normal speed operation in a
two-way mode
Allows bidirectional parallel port
operation at maximum speed
Allows parallel port to operate in
bidirectional mode and at a speed
higher than the maximum data
transfer rate

ECP DMA CHANNEL

Extended Capabilities
User's Guide