Page 1
1 GbE Ethernet SPP/EPP/ECP Parallel Port PS/2 Mouse MIC-IN Port RJ45 LAN Connector (CENTER/LFE) Jack USB2.0 Line-IN Port (SURROUND) Speaker OUT System Fan Connector PS/2 Keyboard USB2.0 COM 2 Port COM 1 Port ® Connector Port Intel 82545 EM GbE Ethernet Controller S/PDIF Connector AC97 Controller System Fan Connector...
Ultra320 SCSI Cable x 1 (DXPL Plus-U only) SENSOR +12V Floppy Cable x 1 IDE1 Cable x 1 +12V SENSOR IDE 2 Cable x 1 (DXPL-U only) CPU1 Fan CPU2 Fan Bonus Pack CD x 1 Norton Anti-Virus CD x 1 I/O Port Bracket x 1 +12V...
3. Install DIMM Modules 5. Connecting 68pin Ultra320 SCSI Cable (DXPL Plus-U) This motherboard has four 184-pin DIMM sockets that allow you to install DDR200/266 The DXPL Plus-U provides two 68-pin Ultra320 SCSI connectors for 16-bit or 16-bit differential SCSI devices.
Page 4
7. ZCR (Zero Channel RAID) Function (DXPL Plus-U) 9. Connecting Front Panel Connector A ZCR card is a PCI card that allows a RAID card to use the onboard SCSI chip, thus Attaching such as power switch, reset switch, HDD LED connector, etc to corresponding A "Zero-channel"...
Page 5
11. PC99 Color Coded Back Panel 13. Support 1Gbps LAN onboard The onboard I/O devices are PS/2 Keyboard, PS/2 Mouse, COM1/Com2, Printer and The Intel 82545EM integrates Intel’s fourth-generation Gigabit MAC design with fully USB2.0. The view angle of drawing shown here is from the back panel of the housing. integrated, physical-layer circuitry to provide a standard IEEE 802.3 Ethernet interface for 1000BASE-T and 100BASE-TX applications.
Page 6
17.JP3 BIOS Configuration / Recovery Select Jumper 15. JP1 Check Password / JP5 SCSI On/Off Jumper This motherboard provides check password function. You can use JP1 to enable or disable You can use JP3 to configure or recover your BIOS. The factory default setting is set to this function, which could prevent your system from unauthorized invasion.
19. BIOS version If you encounter any trouble to boot you system, follow the BIOS version can be found on upper left corner of first boot screen (POST screen). For procedures accordingly to resolve the problem. example: Start Turn off the power and unplug the AC power cable, then remove all BIOS V4.1 R1.02 EN RAS of the addon cards and cables, including VGA, IDE, FDD, COM1, COM2 and Printer.
Page 8
Fax: 31-73-645-9604 or compatibility problems. http://english.aopen.com.tw/tech/download/default.htm China Germany eForum: We welcome you to join AOpen eForum to discuss our products with other 艾爾鵬國際貿易(上海)有限公司 AOpen Computer GmbH. users. Your problem probably had been discussed before or will be answered by Tel: 86-21-6225-8622 Tel: 49-1805-559191 other power users here.