Table of Contents
Advertisement
Preparing the Power Supply
NOTES
• We recommend charging the battery in temperatures between 10 ºC and 30 ºC (50 ºF and 86 ºF). Outside the
temperature range of 0 ºC to 40 ºC (32 ºF to 104 ºF), charging will not start.
20
• If there is a malfunction with the battery charger, AC adapter or battery, the charge indicator will go out and
charging will stop.
• For handling precautions regarding the battery, refer to
• For approximate charging times / usage times, refer to the
Continuous Recording Times
• Charged batteries continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare batteries to last 2 to 3 times longer than you think you might need.
• Repeatedly charging and completely depleting a battery will eventually shorten its battery life. You can check
the battery life on the [B System Setup] status screen (A 202). Fully charging the battery and then depleting
it completely will give you a more accurate reading.
Attaching the Battery
1 Turn off the camera.
2 Insert the battery all the way into the compartment as
shown in the illustration and press it gently downwards
until it clicks.
Removing the Battery
1 Turn off the camera.
2 Holding down the BATTERY RELEASE button ( ), slide
the battery upwards and then pull it out ( ).
Handling Precautions
(A 226).
(A 219).
Reference Tables
(A 228) and
Approximate
Advertisement
Table of Contents
