Table of Contents
Advertisement
Configuring Connection Settings
3 Select
Certificate] > [OK].
• The root certificate file is read from the card.
• After reading a root certificate file, you can select [Root Certificate Details] to check the certificate's issuer
168
and expiration date, or select [Delete Root Certificate] to delete the root certificate in the camera.
NOTES
• Only one root certificate, with one of the following file names, can be read by the camera: "ROOT.CER",
"ROOT.CRT" and "ROOT.PEM".
• If you transfer files using FTPS transfer with a self-signed certificate, you may not be able to trust the
destination server.
802.1X Authentication
The camera is compatible with the following protocols.
EAP-TLS: X.509 supported
EAP-TTLS, PEAP: MS-CHAP v.2 supported
Select
> [
Wizard].
• Follow the wizard to complete the authentication settings.
When you select the [EAP-TLS] protocol, the root certificate, client certificate and private key will be read from
the card.
When you select the [EAP-TTLS] or [PEAP] protocol, select [User Name] and [Password] and enter the
information using the keyboard screen (A 27). Then, read the root certificate from the card.
• After reading the authentication files, select [Check Settings] to check their content. Select [Delete Settings] to
delete the authentication files in the camera.
Giving a Nickname to the Camera
You can give the camera a nickname that is used on network connections and network devices to make it easier
to identify.
Select
> [
• Enter the desired nickname using the keyboard screen (A 27).
Checking and Changing Connection Settings (SET)
You can check and, if necessary, change the settings of connection settings (SET) registered in the camera. In
addition to deleting and renaming connection settings, you can also add to a connection setting a secondary
network or second function.
Checking the Content of a Connection Setting
Select
> [
> [Check Settings].
• The detailed content of the connection setting is displayed.
• Push the joystick left/right to review all the settings and press the CANCEL button to return to the menu.
> [
Network Settings] > [Advanced Settings] > [FTP Transfer Settings] > [Read Root
Network Settings] > [Advanced Settings] > [802.1X Authentication] > [Setup
Network Settings] > [Nickname].
Network Settings] > [Connection Setting] > Desired connection setting ([SET1] to [SET20])
Advertisement
Table of Contents
