Disable Bonjour For Discovery - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Management > Switch Management Mode.
The Switch Management Mode page displays.
6. Select one of the following radio buttons:
• Web browser Only. You can configure the switch through the local browser
interface only.
• Web browser GUI and ProSAFE Utility. You can configure the switch through
the local browser interface or through the ProSAFE Plus Utility. This is the default
setting. However, the ProSAFE Plus Utility has reached end-of-life and is no longer
supported.
7. Click the Apply button.
Your settings are saved.

Disable Bonjour for discovery

By default, the Bonjour protocol is enabled on the switch to allow for native discovery
on macOS devices. For additional security, you can disable Bonjour on the switch,
preventing macOS devices from discovering the switch.
To disable Bonjour on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 7.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
Manage Security 42 User Manual