Create 802.1Q-Based Vlans In A Basic Configuration - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
The VLAN Configuration and VLAN Membership sections display.
9. In the VLAN Identifier menu, select the VLAN.
10. Select the ports that you want to add to the VLAN by doing the following:
a. (Optional) In the Group Operation menu, select either Select All or Remove
All.
All ports are either added to the VLAN or removed from the VLAN.
b. Select or remove individual ports by selecting the check boxes that are associated
with the port numbers.
Note: If ports are members of the same LAG, you must assign them to the same
VLAN.
c. Click the Apply button.
Your settings are saved. In the VLAN Membership table, the ports display as
members of the VLAN.
11. To select ports for another VLAN, repeat Step 9 and Step 10.
Create 802.1Q-based VLANs in a basic
configuration
A 802.1Q-based VLAN configuration lets you assign ports on the switch to a VLAN with
an ID number in the range of 1–4093. By default, all ports are members of VLAN 1.
In an advanced 802.1Q-based VLAN configuration, you can set up VLANs to which you
can add tagged or untagged ports and you can use port VLAN ID (PVID). For more
information, Create 802.1Q-based VLANs in an advanced configuration on page 21.
Use VLANS for Traffic
Segmentation
19 User Manual