Register Your Product - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
The login window opens.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. From the language menu at the top right of the page, select a language.
By default, the selection from the menu is Auto.
A pop-up warning window opens.
6. Click the YES button.
Your settings are saved and the language changes.

Register your product

Registering your product allows you to receive email alerts and streamlines the technical
support process. However, you can also register your product through the device UI.
To register your product through the device UI:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection.
Note: You must access the switch while connected to the network (on-network) to
register the switch.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 7.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select Help > Registration.
The Product Registration page displays.
6. Click the Register button.
Get Started 13 User Manual