Viessmann VITOCROSSAL 200 Service Instructions Manual page 17

Further details regarding the individual steps
C
D
E
F
Status Service
C
D
R
S
E
F
Commissioning, inspection, maintenance
01. Press button S E for longer than
2 s. " " flashes.
02. Press button
shows "6" under Service.
03. Press button S E until display C
shows "6" under Status.
04. Press button
shows "3" under Service.
05. Press button S E until display C
shows "3" under Status.
06. The current height is shown in dis-
play C under Service (0 = low
height or 1 = large height).
G
07. Press button
play C shows "1" under Service for
large height.
"1" is displayed briefly under Serv-
ice.
08. Press button S E to confirm. Reset
to "1" if "0" appears.
09. Press button S E to quit adjust-
ment mode and return to the oper-
ating display.
10. Press button R G for more than
2 s; the system restarts and the
adjustments are adopted.
11. Complete the "height adjustment"
label and attach it next to the type
plate.
12. Complete the adjustment report and
send by fax.
(cont.)
F until display C
F until display C
F or D until dis-
17