Expanding And Assigning Parameters To The Device; Open The Device - Siemens SIMATIC IPC327G Operating Instructions Manual

Expanding and assigning parameters to the device

5.1

Open the device

Requirements
• The device is disconnected from the power supply.
• All connecting cables on the device are removed.
• The device is removed from the cabinet.
• A T10 screwdriver
Procedure - opening the device
Procedure - closing the device
To close the device, carry out the steps for opening the device in the reverse order.
SIMATIC IPC327G
Operating Instructions, 09/2021, A5E51366275-AA
Remove the marked four screws on the rear panel of the
device.
Lift up the device's rear panel.
5
33