Installing The Switch In A 19-Inch Rack; Installation Methods - H3C S5560X-30C-EI Installation Manual

Installing the switch in a 19-inch rack

Installation methods

Table2-2 Installation methods for the S5560X-EI switches
Chassis
S5560X-30C-EI
S5560X-54C-EI
S5560X-30F-EI
S5560X-30F-EIF
S5560X-54F-EI
S5560X-34S-EI
S5560X-54S-EI
S5560X-30C-PW
R-EI
S5560X-54C-PW
R-EI
Figure2-2 Procedure for rack-mounting the switch by using the front mounting brackets
Determine the front mounting
bracket installation position (port
side or power module side)
Figure2-3 Procedure for rack-mounting the switch by using the front and rear mounting
brackets
Determine the front
mounting bracket
installation position (port
side or power module side)
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack by using the mounting brackets.
Installation
Installation requirements
methods
Using front
Install the front mounting brackets at
mounting
the port side or power module side.
brackets
•
Install the front mounting brackets
at the port side or power module
side.
•
Install the rear mounting brackets
based on the rack depth.

Using front
and rear
mounting

brackets
Attach the front
mounting
brackets to the
switch
If the rack depth is in the range
of 429 to 595 mm (16.89 to
23.43 in), orient the bracket
with the wide flange inside the
rack.
If the rack depth is in the range
of 274 to 440 mm (10.79 to
17.32 in) and the distance
from the rear rack posts to the
inner surface of the cabinet
door is longer than 153 mm
(6.02 in), orient the bracket
with the wide flange outside
the rack.
Attach the front
mounting brackets to
the switch
Attach the
shoulder
screws to the
switch
2-7
Installation procedure
See "Rack-mounting the
switch by using front
mounting brackets."
See "Rack-mounting the
switch by using front and
rear mounting brackets."
Mount the switch
in the rack
Attach the
Mount the
rear mounting
switch in the
brackets to
the rack
rack