Installing The Switch In A 19-Inch Rack - H3C S1600V2 Series Installation Manual

Product models
All models

Installing the switch in a 19-inch rack

About mounting brackets
The S1600V2 series switches that this installation method come with mounting brackets, as shown
in Figure 2.
Figure 2 Mounting bracket
1
(1) Screw hole for attaching the bracket to the switch
Attaching the mounting brackets to the switch
IMPORTANT:
M4 screws are used for attaching the mounting brackets to the switch. As a best practice, use a
torque of 12 kgf-cm (1.18 Nm) to fasten the M4 screws..
To attach the mounting brackets to the switch:
1. Align the mounting bracket installation holes with the screw holes in the chassis.
2. Fasten the M4 screws (provided) to secure the mounting bracket to the switch, as shown in
Figure
NOTE:
The attachment methods for the mounting bracket are similar. This example attaches only one
mounting bracket to one side of the switch.
Available installation methods
Mount the switch on a workbench
2
3.
Installation procedure
Mounting the switch on a workbench
(2) Screw hole for attaching the bracket to the rack
9