Daewoo DW-3000 Series Training Manual page 69

2. HOW TO CHECK THE CLUTCH SPRING PROBLEM.
PROBLEM
1) THE LAUNDARY IS IN THE SPIN TUB UNEVENLY WHEN JUST STARTING SPIN PROCESS.
2) THEREFORE, IT CAUSE THE SERIOUS NOISE AND VIBRATION WHEN WASHING
AND SPINNING PROCESS
OR SUPPLING WATER IRREGULARY WHEN SPINNING PROCESS
AND CAUSE SHORT OF SPIN PERFORMANCE.
CHECKING METHOD
IN THIS CASE, YOU MUST EMPTY THE SPIN TUB FIRST.
1) TO CHECK THE REVOLUTION OF SPIN TUB. IF THE SPIN TUB DOES NOT REVOLVE
AND ONLY THE PULSATOR IS TURNING, THAT IS CLUTCH SPRING DEFECT.
2) TO CHECK THE SPIN SPEED(RPM) BETWEEN SPIN TUB AND PULSATOR.
IF YOU FIND THE DIFFERENT SPIN SPEED BETWEEN SPIN TUB AND PULSATOR,
THIS IS ALSO CLUTCH SPRING DEFECT.
INSTEAD OF GEAR MECHANISM ASSEMBLY. PLEASE REFER TO FOLLOWING FIG.
THE CLUTCH BOSS ASSEMBLY
1
NO.
2
1 CLUTCH SPRING 1.5*1.5
2 CLUTCH BOSS
3 GREASE
PACKING PACKING THE CLUTCH BOSS ASS'Y
3
METHOD BY USING VINYL PACK
CLUTCH BOSS ASS'Y PART CORD : 3619301400
PARTS NAME SPECIFICATION
PP(black color)
beacon#325 3g
66
CODE
Q'TY
3615110000 1
3619301300 1
1