SRAM Rockshox Reverb AXS XPLR 2022 Service Manual page 27

5 Insert a new top out pad into the seal head, tapered end first. Seat it Insert a new top out pad into the seal head, tapered end first. Seat it
into the seal head securely into place. into the seal head securely into place.
Check and confirm the top out pad is seated flush in the correct Check and confirm the top out pad is seated flush in the correct
orientation before proceeding. orientation before proceeding.
6 Carefully install the seal head onto the threaded end of the air shaft, Carefully install the seal head onto the threaded end of the air shaft,
outer o-ring/open end first. outer o-ring/open end first.
Do not cut the inner o-ring during installation. Damage to the o-ring
can cause air to leak.
Slide the seal head until it stops against the air piston. Slide the seal head until it stops against the air piston.
NOTI CE
Seal Head and Air Piston Replacement
27