4
Install the battery cover onto the battery.
Install the battery cover onto the battery.
Install the battery block into the seatpost battery slot and close the
Install the battery block into the seatpost battery slot and close the
battery latch.
battery latch.
To avoid damage to the seatpost electronics, do not perform service
until the battery is removed from the seatpost.
5
Remove the saddle from the seatpost.
Remove the saddle from the seatpost.
6
Remove the seatpost from the bicycle frame.
Remove the seatpost from the bicycle frame.
Proceed to 200/600 Hour Service
Proceed to
200/600 Hour Service.
NOTI CE
.
T25
Hex or TORX wrench
13
Seatpost Removal