SRAM Rockshox Reverb AXS XPLR 2022 Service Manual page 25

9 Carefully install the seal head onto the threaded end of the air shaft, Carefully install the seal head onto the threaded end of the air shaft,
outer o-ring/open end first. outer o-ring/open end first.
Do not cut the inner o-ring during installation. Damage to the o-ring
can cause air to leak.
Slide the seal head until it stops against the air piston. Slide the seal head until it stops against the air piston.
10 Apply additional grease to the air piston o-ring and the seal head Apply additional grease to the air piston o-ring and the seal head
o-ring. o-ring.
Proceed to 200/600 Hour Service - Upper Post Service Proceed to 200/600 Hour Service - Upper Post Service.
NOTI CE
.
SRAM Butter Grease
Seal Head and Air Piston Service
25