Citizen CT-S310II User Manual page 41

Selected item
Model
CITIZEN CT-S310
EPSON T88*
EPSON 203dpi*
Note:
*:EPSON is a regi stered tradema rk of Seiko Epson Corporation.
Individual setting mode
Set the mem ory switches individually.
Do the settings while confirmi ng the memo ry switch function and settings on
the printout.
1. Load paper.
2. While the pap er cover is open, press and hold the FEED button while turning the
power on.
3. Press the FEED button twice and close the paper cover.
The printer enters the mo de for setting memo ry switches indi vidu ally.
The printer prints "Memory SW (1)" and the curren t setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
4. Press the FEED button.
The list of memo ry switches cycles through in ord er from "Memory SW (1)" →
"Memory SW (2)" → ... "Memo ry SW (10)" → "Save To Memo ry" → "Memo ry SW
(1)" → each time the FEED button is pressed.
Press the FEED button until the number for the memo ry switch you want to change is
printed.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Paper Character
width space
58 mm —
80 mm —
58 mm Invalid
Valid
80 mm Invalid
Valid
58 mm —
80 mm —
Current memor y switch
V10 CONSUMIBLES S.L.
Automat ic memor y switch settings
MSW2-4 MSW3-7
Full Col CBM1000
Print Mod e
WaitData Invalid
WaitData Invalid
WaitData Invalid
WaitData Invalid
WaitData Invalid
WaitData Invalid
WaitData Invalid
WaitData Invalid
Current setting
— 37 —
MSW8-1 MSW6-2
Print Character
Width Space
384 dots —
576 dots —
360 dots 0 dot
390 dots 1 dot
512 dots 0 dot
546 dots 1 dot
420 dots —
576 dots 0 dot