Table of Contents
Advertisement
Spark Arrester
The muffler must be periodically
purged of accumulated carbon. See
the MAINTENANCE CHART.
Removal
WARNING
Never run engine in an enclosed
area. Never perform this opera-
tion immediately after the engine
has been run because exhaust sys-
tem is very hot. Make sure that
there are no combustible materi-
als in the area. Wear eye protec-
tion and gloves. Never stand be-
hind the vehicle while purging ex-
haust system. Respect all applica-
ble laws and regulations.
Remove:
– the screws retaining the spark ar-
rester to the muffler
1. Screws
2. Spark arrester
– spark arrester and sealant joint
1. Spark arrester
2. Sealant joint
3. Muffler
– inner grill with wool.
Remove all carbon deposit in the muf-
fler.
Remove carbon deposits from the
spark arrester using a brush.
NOTE: Use a soft brush and be careful
to avoid damaging spark arrester.
Installation
For installation, reverse the removal
procedure, pay attention to the follow-
ing details:
Check:
– insulated wool and change if it is
deteriorated
– the spark arrester condition, it must
be free of breaks and holes. Re-
place if necessary.
Remove the old sealant joint and re-
place by a new one. Use ULTRA
COOPER sealant (P/N 293 800 090) or
an equivalent product.
_____________________
99
Hide quick links:
Advertisement
Table of Contents
