Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BEMIS bioBidet HD-7000
Summary of Contents for BEMIS bioBidet HD-7000
- Page 1 HD-7000 OWNER’S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PRODUCT INFORMATION Important Safeguards & Cautions......4 Cautions Before Installation........6 Main Unit & Parts............8 Remote Control............10 Dimensions..............11 PRODUCT INSTALLATION Installation..............12 PRODUCT OPERATION Operation...............16 Maintenance & Cleaning........24 Settings................26 Specifications..............29 WARRANTY Warranty................30... -
Page 3: Important Safeguards & Cautions
IMPORTANT SAFEGUARDS & CAUTIONS This unit was manufactured for household use only. Read all DANGER - To reduce the risk of electrocution: operating instructions before installation. • Do not use while bathing. NOTES: • Do not place or store product where it can fall or be pulled into a tub or sink. -
Page 4: Cautions Before Installation
CAUTIONS BEFORE INSTALLATION GROUNDING INSTRUCTIONS Figure 1 DANGER- Improper use of the grounding plug can result in a risk of electric shock. • This product has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. -
Page 5: Main Unit & Parts
MAIN UNIT & PARTS Power Plug Top Mount Top Mount Metal Bolt (x2) Rubber Nut (x2) Dryer Occupied Sensor Wash & Turbo Washer (x2) Catch Plate Bracket Holder Bidet Side Control Panel Heated Seat Night Light T-Valve 7/8” Bidet Water Supply Hose... -
Page 6: Remote Control
REMOTE CONTROL DIMENSIONS Elongated Type Round Type BIDET TURBO PULSE SEAT TEM P To control the To run the bidet To run the turbo To run the pulse function To control seat nozzle position. function. (1 minute) function. (1 minute) during wash/bidet/ temperature. -
Page 7: Installation
INSTALLATION 1. Remove the seat from the 2. Install the T-valve. 3. Fix the catch plate onto 4. Push the main body existing toilet body. the toilet. towards the catch plate completely. Cone washer Align • • • • Release the nuts, and Disconnect the existing Place the catch plate on the Push it until you hear a “click.”... - Page 8 INSTALLATION (CONT.) 5. After installing the T-valve, 6. Turn on the water and 7. Plug in and be sure that Using inline carbon filter connect the supplied check for leaks the nozzle comes out and bidet hose from the center retracts when powered on.
-
Page 9: Operation
OPERATION 1. Sit on the toilet seat 2. Wash, Bidet, Turbo 3. Dry Temperature Control 4. Pulse • • • • Be sure to sit on the seat sensor. Activate a cleansing Dryer operates for 3 minutes. When pressing the Massage If the sensor is not occupied, all function by pressing the button during the operation of... - Page 10 OPERATION (CONT.) 5. Child Function 6. Nozzle Position Control 7. Water Pressure Control 8. Stop • • • • When selecting Child Function Nozzle position is adjustable. Water pressure is All operations will stop. settings adjust to low pressure. (5 positions) adjustable (5 levels) •...
- Page 11 OPERATION (CONT.) 9. Seat/Water 10. Energy Saving Function 11. Nozzle Cleaning 12. Night Light Temperature Control Eco 1 3 Seconds • This mode is activated by pressing the Energy Saving button until the yellow LED lamp lights up. (Seat and water temperature will be kept at 32°C) •...
- Page 12 OPERATION (CONT.) 13. Automatic Tank Draining 14. Sitz Bath 15. Seat Sensor Bypass 16. Reset 3 Seconds 3 Seconds 3 Seconds Stop Stop • • • • To protect from water Wash or Bidet is switched to The seat sensor can be Press and hold the Stop contamination, the water tank Wash Sitz Bath or Bidet Sitz...
-
Page 13: Maintenance & Cleaning
MAINTENANCE & CLEANING 1. Screen Filter Cleaning 2. Seat Cleaning 3. Extended Non-Use 4. Draining of Tank Screen filter Waters upply hose • • • • Close the water valve. Exterior surface of unit is made When the bidet seat is not Remove the power plug from of plastic material, which may being used for an extended... -
Page 14: Settings
SETTINGS TROUBLESHOOTING GUIDE User settings with the remote control Please check the following points before requesting repair service Seat sensor “off” Seat sensor “on” Regardless of on/off No. Function Seat Switch Description Initial Problem Check List Status Operation Status • Completely out of order. -
Page 15: Specifications
SPECIFICATIONS TROUBLESHOOTING GUIDE (CONT.) Please check the following table and inform the exact status Item HD-7000 when requesting repair service. Rated Voltage AC 120V, 60Hz No. Self Diagnosis Indication Max. Power Consumption 870W Water temp sensor is disconnected or LEDs of water low + middle Power cord length 1.2m not inserted... -
Page 16: Warranty
WARRANTY • We hereby guarantee the product as follows in accordance with the regulation of consumer damage compensation. • In case of product failure, please contact Bio Bidet • Product warranty will be effective for one year from the date of purchase. Regarding Product Warranty Regulation •... - Page 17 Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 847.458.2334 U.S. TOLL FREE: 877.339.5214 support@biobidet.com www.biobidet.com...