Carrier XPower Owner's Manual page 13

ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
Operation
Stop Stop
Setting combined TIMER
1
Press the ON TIMER button to adjust the
ON
ON timer.
2
Press the OFF TIMER button to adjust the
OFF
OFF timer.
3
Press the SET button.
• Either ON or OFF timer function which is closer to
the current time, is activated first.
• If the same time is set for both ON and OFF timers,
no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer
(setting both ON and OFF timer
simultaneously and activate every
day)
This feature is useful when you want to use combined
timer at the same time every day.
Setting combined TIMER
1
Press the ON TIMER button to adjust the
ON
ON timer.
2
Press the OFF TIMER button to adjust the
OFF
OFF timer.
3
Press the SET button.
4
After step 3, an arrow mark ( or ) flashes
for about 3 seconds and during this flashing,
press the SET button.
• During the every day timer is activating, both arrows
( , ) are indicated.
23-EN
1115350277.indd 13
Cancel the timer operation
Press the CLR button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefly and the present time is displayed about 3
seconds.
High power operation
High power (Hi POWER)
The Hi POWER (high power operation) mode
automatically controls room temperature, fan speed
and operation mode so that the room is quickly cooled.
PRESET FAN
MODE
1
SWING FIX HI-POWER
Setting Hi POWER mode
1
Hi-POWER button
Press the Hi-POWER button after starting any
operation. At the same time, the "Hi POWER"
mark on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi-POWER button
Press the Hi-POWER button once again.
At the same time, the "Hi POWER" mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in the DRY
and FAN ONLY operation and when the ON TIMER
operation is reserved.
• Hi POWER mode is not available for group control.
When Hi POWER is transmitted to the Header indoor
unit, the receiving sound is heard but the Hi POWER
mode will not be performed. Please cancel the Hi
POWER mode.
– 12 –
Preset operation
Set your preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airflow direction).
1 PRESET FAN
Select your preferred operation.
1
Press the PRESET button for 3 seconds to
memorize the setting.
The mark is displayed.
When you press this button next time, the
memorized operation mode will be enabled.
9/27/2018 8:57:12 AM
EN
24-EN