Panasonic SA-AK330GC Service Manual page 30

SA-AK330GC / SA-AK330GN
Step 7 Move the slide plate 1 to forward fully.
Step 8 Install the rear lock. (The claw should be latched.)
Step 9 Install the Spindle Position P.C.B.. (The claw should be
latched.)
Step 10 Install the tray lock. (The claw should be latched.)
All manuals and user guides at all-guides.com
Step 11 Remove the tray lock spring from hook,and then latch
to the tray lock.
Step 12 Install the UP/DOWN gear, change gear, change gear
spring, pulley gear and belt in the order of (1) - (5).
Step 13 Install the gear holder, and then tighten the screw (a).
30