Panasonic SA-AK330GC Service Manual page 21

Note:
Be careful not to lose the 3 floating spring because those will
also be removed on removal of the traverse deck ass'y.
· Installation of the CD Servo P.C.B. after replacement
Step 1 Connect the FFC board.
Step 2 Install the CD servo P.C.B. in the traverse deck ass'y.
Step 3 Remove 3 screws.
Step 4 Solder.
· Note for installation of the CD servo P.C.B.
· Installation for traverse deck ass'y
All manuals and user guides at all-guides.com
21
Step 1 Install the traverse deck ass'y to the timing lever.
Step 2 Align the boss of traverse deck ass'y with the slot of
traverse cam gear.
Step 3 Force the claw of timing lever.
Step 4 Force the disc tray fully.
SA-AK330GC / SA-AK330GN