Panasonic SA-AK330GC Service Manual page 20

SA-AK330GC / SA-AK330GN
Step 6 Lift up the traverse deck ass'y.
Step 7 Remove the traverse deck ass'y from the timing lever.
Caution:
When removing or inserting the traverse deck avoid touching
the OPU lens and pressing onto the turntable.
Step 8 Remove 3 screws.
Step 9 Unsolder the motor terminals (4 points).
All manuals and user guides at all-guides.com
Step 10 Remove the FFC board from the connector, and then
remove the CD Servo P.C.B.
Step 11 Remove the pin.
Step 12 Release the claw, and then remove the traverse deck
ass'y.
20