Table of Contents
Advertisement
Installing the Device
This section describes how to install the device, including mounting the device,
connecting power, and connecting the device to the network.
Electrocution hazard – risk of serious personal injury and/or damage to
equipment
Before performing any maintenance tasks, make sure all power to the device has
been disconnected and wait approximately two minutes for any remaining energy
to dissipate.
IMPORTANT
This product contains no user-serviceable parts. Attempted service by unauthorized
personnel shall render all warranties null and void.
Changes or modifications not expressly approved by RuggedCom Inc. could
invalidate specifications, test results, and agency approvals, and void the user's
authority to operate the equipment.
IMPORTANT
This product should be installed in a restricted access location where access can only
be gained by authorized personnel who have been informed of the restrictions and
any precautions that must be taken. Access must only be possible through the use
of a tool, lock and key, or other means of security, and controlled by the authority
responsible for the location.
2.1
Unpacking the Device
When unpacking the device, do the following:
1.
2.
3.
IMPORTANT
If any item is missing or damaged, contact Siemens for assistance.
RUGGEDCOM RS900GF
Installation Manual, 01/2021, C79000-G8976-1352-05
DANGER
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
Verify all items are included.
2
5
Advertisement
Table of Contents
