Table of Contents
Advertisement
Introduction
1.2 Description
1.2
Description
The RUGGEDCOM RS900GF features various ports, controls and indicator LEDs on the
front panel for connecting, configuring and troubleshooting the device.
1
2
3
4
1
2
3
4
5
6
7
Figure 1.1
Communication Ports
RS-232 Console Port
POWER LED
ALARM LED
Failsafe Alarm Relay
2
5
6
ALARM LED
POWER LED
Fiber Optic or SFP (Small Form-Factor Pluggable) Ethernet Ports
Copper Ethernet Ports
RS-232 Console Port (DB9)
Failsafe Alarm Relay
Power Supply Terminal Block
RUGGEDCOM RS900GF
7
Receive and transmit network traffic, as well as provide remote Web
access to the RUGGEDCOM RS900GF operating system. For more
information, refer to:
•
"Connecting to the Device (Page 15)"
•
"Communication Ports (Page 17)"
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page
Illuminates when power is being supplied to the device.
Color
Green
Off
Illuminates when an alarm condition exists.
Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 10)"
•
"Failsafe Alarm Relay Specifications (Page 21)"
15)".
Description
Device is receiving power
No power
RUGGEDCOM RS900GF
Installation Manual, 01/2021, C79000-G8976-1352-05
Advertisement
Table of Contents
