Test Run Operation - Mitsubishi Electric PUMY-P112VKM4 Technical & Service Manual

8-1-1-2. Test run for MA remote controller <PAR-4xMAA (˝x˝ represents 0 or later)>
Select ˝Service˝ from the Main menu, and press the [
1
Select ˝Test run˝ with the F1 or F2 button, and press the [
Select ˝Test run˝ with the F1 or F2 button, and press the [
2

Test run operation

Press the F1 button to go through the operation modes in the order of ˝Cool
and Heat˝.
Cool mode: Check the cold air blows out.
Heat mode: Check the heat blows out.
Check the operation of the outdoor unit's fan.
Press the [ ] button and open the Vane setting screen.
Auto vane check
Check the auto vane with the F1
Press the [ ] button to return to ˝Test run operation˝.
Press the button.
When the test run is completed, the ˝Test run menu˝ screen will appear.
The test run will stop automatically after 2 hours.
*The function is available only for the model with vanes.
OCH673D
] button.
F2 buttons.
55 55
] button.
] button.
MENU RETURN SELECT ON/OFF
Function buttons
F1 F2 F3 F4
S e v r c i e m e n u
Test run
Input maintenance info.
Settings
Check
Others
M a n i m e n : u
C u s r r o
F1 F2 F3 F4
Test run menu
Test run
Drain pump test run
Service menu:
Cursor
F1 F2 F3 F4
F1 F2 F3 F4
Test run Remain
Pipe
Cool Auto
Switch disp.
Mode Fan
F1 F2 F3 F4
F1 F2 F3 F4
Test run
Remain
Vane
F1 F2 F3 F4