Campbell Hausfeld PS240C Operating And Assembly Instructions Manual page 13

Operating Instructions and Assembly Instructions
Airless Paint Sprayers
ClEANUP FOr ChANGING PAINTS Or
TEmPOrAry STOrAGE FOr mOrE
ThAN ONE NIGhT (Continued)
17. Make sure prime/spray control is in
SPRAY position to reduce dribbling.
18. Turn pressure to LOW (completely
counterclockwise).
19. Turn power switch to OFF position.
20. With gun pointed in safe direction
pull trigger with lock released to
relieve any pressure in hose.
21. Engage gun trigger lock.
22. Clean buckets and dispose of any
waste paint and cleaning fluid in
an environmentally responsible
manner.
23. Clean tip guard with cleaning brush
and cleaning fluid.
NOTE: At this point, pump, hose and
spray gun are clean, but still require
further preparation for storage of more
than one day.
Finishing Touches/Shutdown
1
Prime/Spray is
in SPRAY/ROLL
Position
20
Pull Gun Trigger with
Trigger Lock Released
1 1
18
Turn Pressure to LOW
(completely counterclockwise)
21
To Lock Locked
Engage Gun Trigger Lock
www.chpower.com