Campbell Hausfeld PT2830 Operating Instructions And Parts Manual

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Campbell Hausfeld paint tank is
designed for large volume projects
using spray guns, paint rollers and
other application equipment. The tank
is capable of holding 2.5 gallons of
bulk paint or a 1 gallon can of paint
may be placed directly inside the tank.
Basic construction of the unit consists of
a heavy deep drawn one piece
galvanized steel tank and die cast
aluminum tank lid. The unit is equipped
with a pressure regulator, gauge, safety
relief valve, and air line connectors. A
convenient carrying handle allows
attachment of the unit to the rung of a
ladder or scaffolding to facilitate
elevated painting operations.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Tighten
fittings, bolts, etc., before putting unit
into service.
unit if damaged during shipping,
handling or use. Damage may result in
bursting and cause injury or property
damage.

Specifications

Capacity
1 Gallon can or
2.5 Gal. bulk
REMINDER: Keep your dated proof of purchase for warranty purposes!
© 2008 Campbell Hausfeld/Scott Fetzer

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, could result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, may result in
minor or moderate injury.
important information, that if not
followed, may cause damage to
equipment.
Do not
General Safety
operate
Information
CALIFORNIA PROPOSITION 65
or its power cord may contain
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
Tank Overall
Dimensions Dimensions
9.5 inch Dia. x 13.25 inches x 13.25 inches
9.25 inch H x 20 inches
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Paint Tank
Danger
indicates
Warning
indicates
Caution
indicates
Notice
indicates
PERSONAL SAFETY
Since the paint tank and other
components used, (air compressor,
material pump, spray guns, filters,
lubricators, hoses, etc.) make up a high
pressure pumping system, the
following safety precautions must be
observed at all times:
This
1. Read all manuals included
product
with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.
Weight
(Empty)
25 lbs.
PT2830
MANUAL
Maximum Working
Pressure
50 psi
IN721800AV 2/08