Motorola APX 1000 User Manual page 23

NOTICE:
• If the Dynamic ID menu key is not pre-programmed in the radio, use dongle to display
the menu key. Press the menu key and enter the password to view or edit the ASTRO
Individual ID and/or MDC Primary ID of the radio.
• If the password is not pre-programmed, press the menu key to directly view or edit the
ASTRO Individual ID and/or MDC Primary ID of the radio.
Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for a Priority-One channel) to temporarily replace the
Priority-Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
In-Call User Alert
Allows the radio to remain muted to affiliated talkgroup calls while operating on the current Trunking
Personality or conventional channel.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Location
Displays the current location (latitude, longitude, time, and date), and also the distance and bearing
to another location, or toggles GPS/Location between on and off.
Message
Allows you to access the message list.
Mode Select
Long press – Assigns the current zone and channel to a programmable button.
Short press – Changes to the preset Mode Select zone and channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Multiple Private Line (Conventional Only)
Allows you to access the Multiple Private Line lists.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels and the designated
transmit channel from the scan list.
Phone Call
Allows you to make and receive calls similar to standard phone calls.
Private Call (Trunking Only)
Allows a call from one individual radio to another.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.
Private Line Disable
Allows you to adjust the desired squelch level of the radio.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Query
Launches a list of predefined short text messages only after logging in with Two-Factor
Authentication.
Radio Profiles
Allows you to access a set of preprogrammed visual and audio settings of the radio.
MN000255A01-BN
Chapter 3: Radio Controls
23