Husqvarna Rider 11 Workshop Manual page 22

Reparation instructions
7
Securely fasten the protective plate over the
silencer, two screws on each side of the silencer.
Only Rider 14 Pro.
8
Firmly press the fuel line against the fuel pump and
tightly screw the pump's upper hose clamp.
9
Attach the engine's electrical connections.
20
– English
10
Tightly screw the cable from the start motor to the
starter relay.
11
Lift the battery into place and fasten the cable
connections and safety guard. Tighten the catching
belt.