Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Inspiron 3502 Service Manual

Steps
Place the power-adapter port into its slot on the palm-rest and keyboard assembly.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the wireless card.
4. Install the M.2 2230 solid-state
5. Install the M.2 2280 solid-state
6. Install the base cover.
7. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the M.2 2230 solid-state
4. Remove the M.2 2280 solid-state
5. Remove the hard drive.
6. Remove the wireless card.
7. Remove the display assembly.
8. Remove the fingerprint-reader
9. Remove the touchpad.
10. Remove the speakers.
11. Remove the I/O board.
60 Removing and installing components
drive, if applicable.
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
drive, if applicable.
board.
computer.
computer.