Steps
1. Place the coin-cell battery into the coin-cell battery holder on the I/O board with the plus sign facing up.
2. Press down on the coin-cell battery to lock it in place in the coin-cell battery holder.
3. Turn the I/O board over.
Next steps
1. Install the
I/O
board.
2. Install the
base
cover.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state
4. Remove the
M.2 2280 solid-state
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
drive, if applicable.
drive, if applicable.
computer.
computer.
Removing and installing components
33