Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Base cover
Palm-rest and keyboard
assembly
Base cover
Palm-rest and keyboard
assembly
Battery
Palm-rest and keyboard
assembly
Display panel
Display assembly
Display panel
Display assembly
Hard-drive assembly
Palm-rest and keyboard
assembly
Hard-drive bracket
Hard drive
Heat sink
Palm-rest and keyboard
assembly
Heat sink
System board
Screw type
Quantity
M2.5x6
7
Captive screw
2
M2.5x2.5+5L
M2x3
3
M2x2.5
2
M2.5x2.5
6
M2x3
3
M3x3
4
M2x5
2
Captive screw
4
Removing and installing components
2
Screw image
9
Advertisement
Table of Contents
