Power Supply Connection - Fisher & Paykel ACTIVESMART RS32A72 Installation Manual

Internal box Connect to power supply
Locate the power cord and connect the fitted plug to the electrical supply
1
Miscellaneous
Y
(115 V, 60 Hz). Turn ON the appliance.
components
– We recommend to use an isolating switch that can be accessed
easily after the appliance is installed.
Power cord clip
(2)
Attach a power cord clip (A) to the back of your appliance.
2
Secure the excess power cord length onto the clip (B).
3
!4

POWER SUPPLY CONNECTION

DETAIL B
SCALE 1 : 5
A B
Alternative water and electrical connection (above the cavity)
Connect the water fittings to the water supply (C).
1
Plug-in the power cord to the electrical supply (D), and turn on the
2
appliance.
Attach the power cord clip to the back of your appliance, and secure the
3
excess power cord length onto the clip (E).
– When pushing the appliance into position, take care not to roll over
or damage the power cord and / o r water tubing.
Refer to 'Electrical and Plumbing' for more information on recommended
and alternative water and power connections.
E
D
C
21