Water And Power Supply Connection - Fisher & Paykel RS80A1 Installation Manual

Water fittings kit
Connect to water supply (Ice and Water models only)
(Ice and Water
models only)
Water fittings are not supplied and must be purchased separately. The appliance comes with a pre-connected plastic water tubing.
Ensure there is enough tubing for the water connection and to pull the appliance out for service, if required.
Move the appliance in front of the cabinetry close enough that you still have access behind for power and water connections.
Water tap adaptor
(1x)
Collet locking clip
(1x)
22

WATER AND POWER SUPPLY CONNECTION

1
2
3
Connect the water tap adaptor to a water tap.
Flush water through the hose prior to connection to
the appliance to remove any debris in the hose.
Connect the free end of the plastic tubing fully into a
water tap adaptor. Pull gently to ensure it is locked in.
Secure the connection with a locking key inserted
between the water tap adaptor and locking collet.