1000Base-T Sfp Specifications; 1000Base-Xd Ddi 1310 Nm Sfp Specifications - Avaya 2330 Installation Manual

SFP specifications
Receiver characteristics
Receiver sensitivity
Maximum input power

1000BASE-T SFP specifications

The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector. The 1000BASE-T is a tri-speed copper SFP that can operate at 1 gigabit per second
(1 Gb/s), 100 megabits per second (100 Mb/s), or 10 Mb/s.
This SFP supports autosensing of port speed and autonegotiation of duplex mode. However,
you can also set a fixed speed at 10 or 100 Mb/s and duplex mode to half or full.
The part number for this model is AA1419043-E6 (internal part number 323242-B).
Important:
Avaya recommends setting all 1000BaseT ports to auto-negotiate in accordance with the
IEEE 802.3ab standard. By default, SFPs inserted into certain product-specific modules are
set for autonegotiation = True.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 12: IEEE 802.3z 1000BASE-T SFP specifications
Standards
Connectors
Cabling
Distance

1000BASE-XD DDI 1310 nm SFP specifications

The following table describes the 1000BASE-XD DDI SFP. This SFP operates at 1310 nm and
has a reach of up to 40 km. The part number is AA1419050-E6 (internal part number 318636-
B).
38 Installation — SFPs
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
– 17 dBm
0 dBm
Specifications
IEEE 802.3z, IEEE 802.3ab
RJ-45
CAT5E or better UTP
Up to 100 m
December 2011