Job Aid - Avaya 2330 Installation Manual

Small form factor pluggable transceivers
4. Remove the dust cover from the optical bore and insert the fiber optic connector.

Job aid

Depending on the transceiver manufacturer, your SFP transceiver can have various types of
locking and extractor mechanisms.
The following figure shows a typical mechanism used on SFP transceivers; other locking and
extractor mechanisms exist, although they are not shown here. In the following figure, the SFP
still has the bore plug installed. Pull the bail to release the device.
The following figure shows the wrap-around latch-type extraction mechanism. To remove the
device, push the collar towards the module.
26 Installation — SFPs
Comments? infodev@avaya.com
December 2011