Bixby Ide Configuration; Sata Configuration - Asus ROG STRIX X570-F GAMING Manual

PSS Support
This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT
objects. Configuration options: [Disabled] [Enabled]
NX Mode
This item allows you enable or disable no-execute page protection function.
Configuration options: [Disabled] [Enabled]
SVM Mode
This item allows you enable or disable CPU Virtualization.
Configuration options: [Disabled] [Enabled]
Core Leveling Mode
This item allows you to change the number of compute unit in the system.
Configuration options: [Automatic mode] [One Computer Unit]
3.6.3

Bixby IDE Configuration

The items in this menu allow you to configure Bixby IDE devices.
3.6.4

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA 0/1 Enable
This item allows you to enable or disable the SATA Device. Configuration options: [Disabled]
[Enabled]
SATA Mode
This item allows you to set the SATA configuration.
[AHCI]
[RAID]
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_8(Gray)
SATA6G_1(Gray) - SATA6G_8(Gray)
This item allows you to enable or disable the selected SATA port. Configuration
options: [Disabled] [Enabled]
3-14
Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
Set to [RAID] when you want to create a RAID configuration from
the SATA hard disk drives.
Chapter 3: BIOS Setup