2.3.4.
IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
IDE Configuration
Onboard IDE Controller
Serial-ATA Devices
SATA Mode select
Onboard.IDE.Controller.[Enabled]
Allows you to enable or disable the onboard IDE controller.
Configuration options: [Enabled] [Disabled]
Serial-ATA.Devices.[Enabled]
Allows you to disable or set the Serial-ATA devices.
Configuration options: [Enabled] [Disabled]
SATA.Mode.select.[SATA.Mode]
Allows you to
Configuration options: [SATA Mode] [RAID Mode]
The following items appears only when the SATA Mode select item is set to
[RAID Mode].
SATA.Primary.Master/Slave.Channel.[Disabled]
Allows you to disable or enable the Serial-ATA Primary Master/Slave Channel.
Configuration options: [Enabled] [Disabled]
SATA.Secondary.Master/Slave.Channel.[Disabled]
Allows you to disable or enable the Serial-ATA Secondary Master/Slave Channel.
Configuration options: [Enabled] [Disabled]
2-16
.
select the SATA Mode.
[Enabled]
[Enabled]
[SATA Mode]
Chapter 2: BIOS setup