Asus ROG STRIX X570-F GAMING Manual page 28

3. USB 3.2 Gen2 front panel connector (U32G2_C11)
This connector allows you to connect a USB 3.2 Gen2 module for additional USB 3.2
Gen2 ports. The latest USB 3.2 Gen2 connectivity provides data transfer speeds of
up to 10 Gbps. The next-generation standard is completely backward-compatible with
your existing USB devices.
ROG STRIX X570-F GAMING
USB3.2 Gen2 front panel connector
The USB 3.2 Gen2 module is purchased separately.
4. USB 3.2 Gen1 connector (20-1 pin U32G1_12)
This connector allows you to connect a USB 3.2 Gen1 module for additional USB 3.2
Gen1 front or rear panel ports. With an installed USB 3.2 Gen1 module, you can enjoy
all the benefits of USB 3.2 Gen1 including faster data transfer speeds of up to 5 Gb/s,
faster charging time for USB-chargeable devices, optimized power efficiency, and
backward compatibility with USB 2.0.
ROG STRIX X570-F GAMING USB 3.2 Gen1 connectors
The USB 3.2 Gen1 module is purchased separately.
The plugged USB 3.2 Gen1 device may run on xHCI or EHCI mode depending on the
operating system's setting.
1-14
U32G2_C11
SBU2
SBU1
STRIX X570-f GAMING
CC1
VBUS
RX1-
RX1+
GND
TX1-
TX1+
VBUS
U32G1_12
STRIX X570-f GAMING
VBUS
TX2+
TX2-
GND
RX2+
RX2-
GND
D-
D+
CC2
PIN 1
Chapter 1: Product Introduction