Deactivating the travel lock
Cleaning and maintenance
Cleaning the shaver under the tap
1 Press the on/off button for 3 seconds.
While you deactivate the travel lock, the
indications on the display light up briefly. The
shaver switches on and is now ready for use
again.
Note: The shaver unlocks automatically when it is
connected to a wall socket.
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip
out of the base of the shaver. This is a normal
occurrence.
1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap.
You can also clean the shaving unit with the
cleaning brush supplied.
32
English