The box shows the accessories that have been supplied with your appliance. Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Please read this user manual, as it contains...
Page 23
English Danger - Keep the supply unit dry. Warning - To charge the battery, only use the detachable supply unit (HQ8505) provided with the appliance. - The supply unit contains a transformer. Do not cut off the supply unit to replace it with another plug, as this causes a hazardous situation.
- Do not use the supply unit in or near wall sockets that contain an electric air freshener to prevent irreparable damage to the supply unit. Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. General - This shaver is waterproof.
English The display Battery charge indicator Quick charge: When the battery is empty and you connect the shaver to a wall socket, the lights of the battery charge indicator light up white one after the other repeatedly. When the battery contains enough energy for one shave, the bottom light of the battery charge indicator starts flashing white slowly.
English Battery low When the battery is almost empty, the bottom light of the battery charge indicator flashes orange. At this point there is enough energy left for one shave. Remaining battery charge The remaining battery charge is indicated by the lights of the battery charge indicator that light up continuously.
English Replacement reminder For maximum shaving performance, we advise you to replace the shaving heads every two years. The shaver is equipped with a replacement reminder which flashes to remind you to replace the shaving heads. Note: After replacing the shaving heads, you should reset the replacement reminder by pressing the on/off button for 7 seconds.
English Quick charge After approx. 3 minutes of charging, the shaver contains enough power for one shave. The bottom light of the battery charge indicator starts flashing white slowly when the quick charge is finished. Charging with the supply unit 1 Make sure the shaver is switched off.
English Switching the shaver on and off 1 To switch the shaver on or off, press the on/off button once. The display lights up for a few seconds to show the battery status. Shaving Skin adaptation period Your first shaves may not bring you the result you expect and your skin may even become slightly irritated.
Page 30
English 3 Switch off and clean the shaver after each use (see 'Cleaning and maintenance'). Wet shaving For a more comfortable shave, you can also use this shaver on a wet face with shaving foam or shaving gel. 1 Apply some water to your skin. 2 Apply shaving foam or shaving gel to your skin.
English 6 Switch off and clean the shaver after each use (see 'Cleaning and maintenance'). 7 Dry your face. Note: Make sure that you rinse all foam or shaving gel off the shaver. Shaving with guard mode 1 Switch on the shaver. 2 Press the guard button once if you want to shave at a lower, more gentle speed.
English Using the precision trimmer attachment (specific types only) You can use the precision trimmer attachment to touch up your beard, sideburns and moustache. 1 Attach the attachment to the appliance (‘click’). 2 Switch on the appliance. 3 Hold the precision trimmer perpendicular to the skin and move it downwards while exerting gentle pressure.
English Deactivating the travel lock 1 Press the on/off button for 3 seconds. While you deactivate the travel lock, the indications on the display light up briefly. The shaver switches on and is now ready for use again. Note: The shaver unlocks automatically when it is connected to a wall socket.
English 3 Switch off the shaver. Press the release button to open the shaving unit. 4 Rinse the hair chamber under the tap. You can also clean the inside of the shaving unit with the cleaning brush supplied. 5 Rinse the shaving head holder under a warm tap.
English 2 Rinse the attachment under a warm tap. 3 After cleaning, switch off the appliance. 4 Carefully shake off excess water and let the attachment air-dry completely. For optimal performance, lubricate the teeth of the attachment with a drop of sewing machine oil every six months.
Page 36
English 6 Clean the cutter and guard under the tap. 7 Put the cutter back into the guard. 8 Place the shaving heads in the shaving head holder. Note: Make sure that the projections of the shaving heads fit exactly into the recesses of the shaving head holder.
Replace damaged shaving heads immediately. Always replace the shaving heads with original Philips shaving heads ( 'Ordering accessories'). Replacement reminder The replacement reminder indicates that the shaving heads need to be replaced.The shaving unit symbol lights up when you switch off the shaver.
Page 38
- S6610, S6620 only. Note: We advise you to let the appliance dry before you store it in the pouch. S6630 only. We advise you to let the appliance and its attachments dry before you put the protection caps on the attachments or store the shaver in the...
English Ordering accessories To buy accessories or spare parts, visit www.philips.com/parts-and-accessories or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details). The following accessories are available:...
English Removing the rechargeable shaver battery Only remove the rechargeable battery when you discard the appliance. Before you remove the battery, make sure that the appliance is disconnected from the mains and that the battery is completely empty. Take any necessary safety precautions when you handle tools to open the appliance.
Page 41
English 6 Bend the battery tags aside with a pair of cutting pliers. 7 Remove the rechargeable batteries.
English Warranty and support If you need information or support, please visit www.philips.com/support or read the international warranty leaflet. Warranty restrictions The shaving heads (cutters and guards) are not covered by the terms of the international warranty because they are subject to wear.
Page 43
Problem Possible cause Solution The shaving unit is Clean the shaving heads soiled or damaged thoroughly (see 'Thorough to such an extent cleaning') or replace them. that the motor cannot run. The appliance The shaving heads Replace the shaving are damaged or heads.