Using Click-On Attachments; Removing Or Attaching Click-On Attachments - Philips S6630 Manual

Using click-on attachments

Removing or attaching click-on attachments

6 Switch off and clean the shaver after each use
(see 'Cleaning and maintenance').
7 Dry your face.
Note: Make sure that you rinse all foam or shaving
gel off the shaver.
Shaving with guard mode
1 Switch on the shaver.
2 Press the guard button once if you want to
shave at a lower, more gentle speed.
3 Move the shaving heads over your skin in
circular movements to catch all hairs growing
in different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
4 Switch off the guard mode by pressing the
guard button once.
Note: The shaver automatically starts operating
at normal speed when you switch it on again.
1 Make sure the shaver is switched off.
2 Pull the attachment straight off the appliance.
Note: Do not twist the attachment while you
pull it off the appliance.
3 Insert the lug of the attachment into the slot in
the top of the appliance. Then press down the
attachment to attach it to the appliance ('click').
30
English