Smart card reader board
Removing the smart card reader board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the
memory
module.
7. Remove the
system
fan.
8. Remove the
DC-in
.
9. Remove the
WLAN
card.
10. Remove the
WWAN
card.
11. Remove the
system
board.
12. Remove the
coin cell
battery.
13. Remove the keyboard.
Steps
1. Unroute the smart card reader board cable.
2. Remove the two (M2x2.5) screws that secure the smart card reader to the palmrest [1].
3. Lift the smart card reader board away from the computer [2].
96
Disassembly and reassembly
before working inside your
card.
computer.