Dell Latitude 5300 Service Manual page 71

Hide thumbs Also See for Latitude 5300:
Table of Contents

Advertisement

5. Peel the adhesive tape and disconnect the cable from the connector on the system board [1].
6. Remove the single (M2x4) screw that secures the eDP bracket to the system board [2].
7. Remove the eDP bracket away from the computer [3].
8. Lift the latch and disconnect the eDP cable from the connector on the system board [4].
Disassembly and reassembly
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

P97gP97g001

Table of Contents